briquette machine production procedure:
material ------ crusher------dryer-------charcoal briquetting machine ----charcoal bar furnace---- product

1.Crusher
Model |
FSJI wood chip machine |
FSJII tree branch chip machine |
capacity(kg/h) |
700 |
900 |
Material dia (mm) |
≤ø150-200 |
≤ø35-50 |
Max material dia (mm) |
Ø5×5 |
Ø5×5 |
power(kw) |
11kw |
11kw |
G/N W. |
400/350kg |
800/750kg |
Product size (mm) |
1250×700 ×910 |
1250×900×1240 |
2. dryer
If the material moisture over 12%,then you need to dry it before making bar,the dryer can dry the material moisture below 12%.

Model |
HGJ-I |
HGJ-II |
HGJ-III |
capacity(Kg/hour) |
250-300kg |
600-800kg |
1000-1400kg |
Material dia |
< 3mm & < 5mm |
< 3mm & < 5mm |
< 3mm & < 5mm |
Hot air temperature |
180°C-250°C |
180°C-250°C |
180°C-250°C |
power |
4kw |
5.5kw |
7.5kw |
weight |
1200kg |
1600kg |
2100 |
Product size |
10×1.0×2.0m |
15×1.0×2.0m |
21×1.8×2.8m |
3. charcoal briquetting machine:
with auto thermostat,it can make the material into high density bar,the bar can be as the burning material for the boiler or fireplace,for house warmming.
Model |
ZBJII |
ZBJI |
Capacity(kg/h) |
250-300 |
130-150 |
Motor power (kw) |
18.5kw |
7.5kw(energy save type) |
Heat element (kw) |
3×3 |
3×1.5 |
Weight(kg) |
1500kg |
1000kg |
Product size |
2300×1050×1200mm |
1650×600×1260 |
4. charcoal bar furnace
It can proceed the half finished raw bar carbonize into charcoal,with reason configuration,low heating waste,use super high temperature steam and cool down system,can accelerate the cool down course,improve charcoal’s quality,speedup production cycle period
Model |
THL-I |
THL-II |
THL-III |
capacity (kg/48hours) |
I000 |
I500 |
2000 |
Carbonizing temperature(°C) |
430°C |
430°C |
430°C |
power |
1.5kw |
1.5kw |
1.5kw |
weight |
4800kg |
6000kg |
7500kg |
Product size (mm) |
2800×1800×2500 |
3200×2200×3500 |
4000×2500×3500 |
|