I. Brief introduction
  This equipment consists of green bricks separating system, green bricks turning system, organizing into groups system, stacking system and so on. The equipment is made based on many years manufacturing experience and reference to the overseas advanced technology, made use of modern high-tech, which has fully displayed high level modern manufacture method of our company. With characteristics of advanced design, excellent processing, high automation, the equipment is suitable for large-scale brick production enterprise with annual output 60 to 80 millions of standard bricks.

Setting machine, which is named brick molding machine (mechanical arm), automatically unloading brick automatic code billet, billet hydraulic machine code, [1] ZMPI automatic code blank machine (automatic unloading brick) is mainly applied to a firing tunnel kiln in the brick automatically laying. This machine adopts advanced PLC more centralized control. Variable Rotating walking uses Frequency Control; lifting and sub-blanks uses hydraulic control with high efficiency, easy maintenance, and low cost, reliable operation. Automatic code blank system represents the most advanced level in the current world. Automatic code blank machine has mainly dedicated slitting machine, cutter, sub-blank machine, folder blank machine, running the system, lifting system, rotating system, hydraulic system and electrical system, etc..  The working process of automatic code blank machine (automatic unloading brick): When the cutter machine cuts tile onto sub-blank board, the sub-billet cylinder out, and driven sub-blanks were open on the tile jointing action. The lifting cylinder goes down after adobe parts down of the jointing action. When Chuck arrived at blank folder location, chuck fixture work, picked up tile, then open the folder to mention from the lifting cylinder to the book plate height, billet cylinder stretched between the air duct with open brick, walking device driver code blank machine running to kiln cars are top of the rotating device to complete turn 90 °. And then scheduled to open fall to put down cylinder billet height, chuck opening fixture on the brick kiln car code, code blank machine laying is layer, layer rotation, the formation of Cross, through the action cycle, to complete all the code blank kiln car process. These functions of the Code blank machine are marching through the PLC frequency than centralized control by electrical, make the code blank automatic. ZMPII automatic code blank machine (automatic unloading brick) applies to a code of secondary burning and fire codes. The brick after grouping will be (wet blank, dry blank) square automatic inside out. The first rotated by way of the folder blank, blank can be wet, dry on the corresponding blank code set position, laying is flexible and fast, any specifications type of kiln are applied.

clay brick making machine,vacuum brick extruder,brick machine

Email:kka08212003@hotmail.com

Msn:kka08212003@hotmail.com

Phone:86-371-64155496

Tel:13783665797 Skype:kka0821