Jaw Crusher

Jaw Crusher:
Jaw Crusher is mainly used to crush kinds of mining stones primarily, and the largest compression resistance of the material to be crushed is 320MPa. The jaw crusher is widely used in mining, metall-urgical industry, building material, highway, railway, and chemical industry.

Working Principle of Jaw Crusher:
The motor transmits power through belt, drives the moving jaw do periodic motion to the fixed jaw surround the eccentric shaft. The angle between toggle plate and moving jaw increases when moving jaw moves up. So the moving jaw closes to the fixed jaw. The stuff will be crushed in this process. The angle of Jaw Crusher between toggle plate and moving jaw decreases when moving jaw moves down, the moving jaw of Jaw Crusher moves away from fixed jaw by the pulling of rod and spring, the products after crushing will be discharged from the outlet of Jaw Crusher.

Characteristics of Jaw Crusher:
High ratio of crushing, homogeneous final grain size, simple structure, reliable working condition, easy maintenance, low operating cost.

Technical Data of Jaw Crusher:

Notice: Any change of Jaw Crushers technical data shall not be advised additionally.

Model	Size of Feeder Opening (mm)	Max. Feeding Size (mm)	Capacity (t/h)	Motor Power (KW)	Overall Dimensions (mm)	Weight (t)
PE150×250	150×250	125	1-3	5.5	896×745×935	0.8
PE250×400	250×400	200	5-20	15	1430×1310×1340	2.8
PE400×600	400×600	350	15-60	30	1700×1732×1653	6.5
PE500×750	500×750	425	50-100	55	2035×1921×2000	10.3
PE600×900	600×900	480	60-130	75	2290×2206×2370	15.5
PE750×1060	750×1060	630	80-180	110	2655×2302×3110	28
PE900×1200	900×1200	750	140-260	110	3789×2826×3025	52
PEX250×750	250×750	210	15-50	22	1667×1545×1020	5
PEX250×1000	250×1000	210	15-50	30	1550×1964×1380	6.5
PEX250×1200	250×1200	210	20-60	37	2192×1900×1950	7.7