Add:No.36, Xinxing Road, Gongyi City, Henan Province , China,451200
This supplier has been
audited by the b2b
>Add to Company Favorites
Hot air dryer prepare suitable moisture raw material for biomass briquette press. For briquetting press, it is only to control the moisture of raw material at a reasonable range that can make good reasult of biomass briquettes. Or the briquettes will be broken because of too loose or too dry.
This wood dryer is suitable for dry the grain, sawdust,etc small granular materials. It dry quickly and with higher capacity.For raw materials with heavy humidity which is above 12%, you need to install a Dryer before further processing. This Air Current Type Dryer can reduce the humidity of wood materials below 12% per time. The Cost of this Air Current Dryer is much lower than Rotary Dryer.
We can supply two types of dryer: sawdust rotary dryer and hot airflow type.It can dry the materials mainly using the hot wind produced by the hot-blast Furnace, the machine is applied to the material in dispersed state which contains high moisture humidity, such as the saw dust, grain or straw.
Drier also named as Drying Machine and Rotary Drier.Drier is mainly consist of rotary body, raw material feeding plate, driving and supporting device, etc.This dryer can dry many kinds of materials which contain moisture, such as coal, coal slurry, slag, industrial waste, and clay stone. They are widely used in building materials, metallurgy, and chemical industry.
The vertical dryer adopt vertical equipment steel structure housing, equipped heat preservation material to preservation heat, in the inner of kiln, using multi-level high temperature castings, overlapping overlap, In the up, middle and down all relevant components, have several group vibrate, closure, temperature control, intelligent control system. Water vapor and smoke collected dust and ruled out by the draught fan whirlwind dust collector.
Slime Drying Machine can be used for drying many kinds of materials and with convenient and reliable operation; therefore, it has been widely used.It is made into rotary body, lifting blade, driving device, supporting device etc. The dryer has advantages of reasonable structure, high efficiency, low energy consumption and convenient for transportation.This series drier is used for drying materials with humidity or granularity in the industries of mineral dressing, building material, metallurgy and chemical.
Powder Drying Machine (cylinder drier) is shaped as a horizontally inclined rotating cylinder. Material is fed at feed port and discharged at the output port . In direct-type Powder Drying Machine (cylinder drier), hot air move through the cylinder in direct contact with the material, either with or against the direction of its flow. The Powder Drying Machine (cylinder drier) is equipped with scatters, which lift the materials and make materials touched the hot air completely.